×
RadLog
Report measurements to APRS via internet (only internet,not HF)
2 years 10 months ago - 2 years 10 months ago #5962
by mw0uzo
Replied by mw0uzo on topic Report measurements to APRS via internet (only internet,not HF)
I checked the source code:
The port is 14580
Also, it appears the setting for the server is not read properly, so it was always uses czech.aprs2.net
Whoops
Sorry czech.aprs2.net
It should still work though
The port is 14580
Also, it appears the setting for the server is not read properly, so it was always uses czech.aprs2.net
Whoops
Sorry czech.aprs2.net
It should still work though
Last edit: 2 years 10 months ago by mw0uzo.
Please Log in or Create an account to join the conversation.
2 years 10 months ago #5963
by DG5BAA
Replied by DG5BAA on topic Report measurements to APRS via internet (only internet,not HF)
Attachments:
Please Log in or Create an account to join the conversation.
2 years 10 months ago #5964
by DG5BAA
Replied by DG5BAA on topic Report measurements to APRS via internet (only internet,not HF)
Attachments:
Please Log in or Create an account to join the conversation.
2 years 10 months ago #5965
by DG5BAA
Replied by DG5BAA on topic Report measurements to APRS via internet (only internet,not HF)
I entered my location coordinates by first filling everything with zeros and then the degrees. The other mask says where the asterisks are now my password. Is everything correct so far?
The TCP Port 14580 is open...
73 and 55
Carsten
The TCP Port 14580 is open...
73 and 55
Carsten
Please Log in or Create an account to join the conversation.
2 years 10 months ago - 2 years 10 months ago #5966
by mw0uzo
Replied by mw0uzo on topic Report measurements to APRS via internet (only internet,not HF)
It all looks good, I tried SSID = 3 and that's OK here too.
Install Wireshark
Start a capture of Ethernet (or your primary network interface) with filter 'port 14580'
Run radlog,Start and wait for 5-10 mins
There will be several packets captured - look for one around 193 bytes in length, that contains your callsign
Install Wireshark
Start a capture of Ethernet (or your primary network interface) with filter 'port 14580'
Run radlog,Start and wait for 5-10 mins
There will be several packets captured - look for one around 193 bytes in length, that contains your callsign
Last edit: 2 years 10 months ago by mw0uzo.
Please Log in or Create an account to join the conversation.
2 years 10 months ago #5967
by gw7eri
Replied by gw7eri on topic Report measurements to APRS via internet (only internet,not HF)
Hi Carsten,
I have been monitoring aprs.fi to see if your report from Radmon is coming up, but nothing so far yet. I have your location from previous beacons as north of a place called Zossen in Germany?
I can see your normal callsign and node showing as a motor car symbol, but nothing from Radmon yet. I will keep the window open on my pc.
No need to apologise - your English is very good!
I will keep monitoring aprs.fi and message you on APRS as soon as I see your beacon! Will get my sensor sorted as soon as I can get new compatible hardware and hope to be uploading again.
Hope you get all working!
Best 73's
Alex
GW7ERI
I have been monitoring aprs.fi to see if your report from Radmon is coming up, but nothing so far yet. I have your location from previous beacons as north of a place called Zossen in Germany?
I can see your normal callsign and node showing as a motor car symbol, but nothing from Radmon yet. I will keep the window open on my pc.
No need to apologise - your English is very good!
I will keep monitoring aprs.fi and message you on APRS as soon as I see your beacon! Will get my sensor sorted as soon as I can get new compatible hardware and hope to be uploading again.
Hope you get all working!
Best 73's
Alex
GW7ERI
The following user(s) said Thank You: mw0uzo
Please Log in or Create an account to join the conversation.
Moderators: Gamma-Man
Time to create page: 0.255 seconds