× RadLog

Report measurements to APRS via internet (only internet,not HF)

gw7eri
Offline
Junior Member

2 years 3 months ago #6000 by gw7eri

Replied by gw7eri on topic Report measurements to APRS via internet (only internet,not HF)

Hi Carsten,

No problem - still thinking hard for you here

vb73's

Alex

Please Log in or Create an account to join the conversation.

DG5BAA
Topic Author
Offline
Junior Member

2 years 3 months ago #6001 by DG5BAA

Replied by DG5BAA on topic Report measurements to APRS via internet (only internet,not HF)

Please Log in or Create an account to join the conversation.

mw0uzo
Offline
Moderator

2 years 3 months ago - 2 years 3 months ago #6002 by mw0uzo

Replied by mw0uzo on topic Report measurements to APRS via internet (only internet,not HF)

DG5BAA wrote:
Daniel !I just sent you an email with a report.

Cu
Carsten

Ok I think I might have spied the problem in the packet.
The coordinates in the packet have been constructed using , as a decimal point. An age old classic internationalisation problem

This would probably be rejected by the APRS server if it always expects a .
To test, set your computer to UK or USA location and set Language to English and reboot. Confirm the . in Calculator?
Then see if RadLog APRS is working. If it does then that's the problem, and it's a bug in RadLog that needs to be fixed.

Last edit: 2 years 3 months ago by mw0uzo.

Please Log in or Create an account to join the conversation.

FSM19
Offline
Elite Member

2 years 3 months ago #6003 by FSM19

Replied by FSM19 on topic Report measurements to APRS via internet (only internet,not HF)

I remember an even worse problem caused by the , rather than the . Many moons ago I worked for the Department of Employment, they updated the software on the national computer system one weekend (used dumb terminals and punched tape for data input). Come Tuesday someone input a comma into an input, the system crashed and it took a week to sort it. We had to handle all the benefit claims clerically, and there were very few of us who knew how to do it.

Please Log in or Create an account to join the conversation.

gw7eri
Offline
Junior Member

2 years 3 months ago #6004 by gw7eri

Replied by gw7eri on topic Report measurements to APRS via internet (only internet,not HF)

Hi Carsten,

I see you on aprs.fi now!!!! DG5BAA-3 Looks like the problem is solved

vb 73's

Alex
GW7ERI

Please Log in or Create an account to join the conversation.

DG5BAA
Topic Author
Offline
Junior Member

2 years 3 months ago - 2 years 3 months ago #6005 by DG5BAA

Replied by DG5BAA on topic Report measurements to APRS via internet (only internet,not HF)

Hi !

It works now !!!

It was because you have to change the Windows system to Great Britain!

Thanks to Daniel and Alex for the help!

I will now do some advertising in the amateur radio association so that this great project is also
used more in Germany among radio amateurs and APRS users because weather data are often
shared but almost no nuclear radiation measurement results.

Now I will try to change the transmission from my callsign DG5BAA to my Internet gateway DB0LW.
So I would have a beacon with information about the local gateway in Luckenwalde (Yaesu C4FM, Wires-X, frequency)
and additional information about the current nuclear radiation.

So again, many, many thanks to everyone involved !!!!

73 & 55
Carsten,DG5BAA (DB0LW)
Luckenwalde

Last edit: 2 years 3 months ago by DG5BAA.

Please Log in or Create an account to join the conversation.

Moderators: Gamma-Man

Time to create page: 0.373 seconds

Solar powered Raspberry Pi 4 server stats: CPU 90% Memory 15% Swap 16% CPU temp=58.4'C Uptime 47 Days