× RadLog

Report measurements to APRS via internet (only internet,not HF)

More
2 years 2 months ago #5968 by DG5BAA
Hello to all! 

This time i will analyse the stream with Wireshark and i found my first problem:

I used a family DNS Server in my router so the IP from euro.aprs2.net was not found in my network. 

I change it in my AVM 7490 Fritzbox now. 

Now the stream is working (i can see it with wireshark with the TCP Filter 14580) but i think the coordinates in the mask are not set correct this time. 

So the APRS Server will not accept my APRS position. 

But i dont know if my settings of position are correct in the mask? 


 



 
Attachments:

Please Log in or Create an account to join the conversation.

More
2 years 2 months ago #5970 by DG5BAA
You do not have permissions to access this page.
Attachments:

Please Log in or Create an account to join the conversation.

More
2 years 2 months ago #5971 by DG5BAA
I set in this pictures my aprs node DB0LW. 
I will use it as a beacon with radlog measurementy...  :) 

Can anyone tell me of the position is set correct in the mask?? 


Thank you! 
Carsten DG5BAA (C4FM Node DB0LW) 

Please Log in or Create an account to join the conversation.

More
2 years 2 months ago #5972 by gw7eri
Hi Carsten,

Can you let me know your nearest town / village please so I can monitor the map??

Best 73's

Alex

Please Log in or Create an account to join the conversation.

More
2 years 2 months ago #5973 by DG5BAA

You do not have permissions to access this page.

Please Log in or Create an account to join the conversation.

More
2 years 2 months ago #5974 by DG5BAA
To Alex!

My town is Luckenwalde near Berlin.. 

73 and 55
Carsten
 

Please Log in or Create an account to join the conversation.

Moderators: Gamma-Man
Time to create page: 0.263 seconds
Powered by Kunena Forum
Everything's free. Please support us by considering a donation. Log in first!
Solar powered Raspberry Pi 4 server stats: CPU 31% Memory 14% Swap 12% CPU temp=54.0'C Uptime 18 Days