Hi From Florence IT

More
8 years 6 months ago - 8 years 6 months ago #1483 by mw0uzo
Replied by mw0uzo on topic Hi From Florence IT
Yes its all done, use your username and the password you sent via PM in RadLog.
User and pass are case sensitive, let me know if you have any problems.
Last edit: 8 years 6 months ago by mw0uzo.
The following user(s) said Thank You: alexsgv

Please Log in or Create an account to join the conversation.

More
8 years 6 months ago #1487 by alexsgv
Replied by alexsgv on topic Hi From Florence IT

Yes its all done, use your username and the password you sent via PM in RadLog.
User and pass are case sensitive, let me know if you have any problems.


Yes, it works! thanks!
I've just a litle question about conversion factor.
Is there a conversion factor for the tube used inside my counter GMC-320+ V4 (Tube M4011) ?
thanks for your help

Alex

Please Log in or Create an account to join the conversation.

More
8 years 6 months ago #1508 by W8HF
Replied by W8HF on topic Hi From Florence IT
From the BASH script examples elsewhere on the forum.

conversionfactor="0.0081" ## GM tube conversion factor for J305 / M4011

Please Log in or Create an account to join the conversation.

More
8 years 6 months ago #1509 by W8HF
Replied by W8HF on topic Hi From Florence IT
Or better yet this forum topic.

http://radmon.org/index.php/kunena/geiger-muller-tubes/43-conversion-factors

I just added a detector to my setup using that tube. The first night showed it slightly more sensitive than SB200. After I collect more data I may revise my settings. I'm adding counts from two separate counters with different tubes so the conversion is a combination of both.

Good luck.

Please Log in or Create an account to join the conversation.

Moderators: Gamma-Man
Time to create page: 0.164 seconds
Powered by Kunena Forum
Everything's free. Please support us by considering a donation. Log in first!
Solar powered Raspberry Pi 4 server stats: CPU 36% Memory 12% Swap 9% CPU temp=62.8'C Uptime 3 Days