New member in Northern California

Hi, I'm Robotguy from Sacramento, CA USA. I've had a Geiger kit from Electronics Goldmine (https://www.goldmine-elec-products.com/prodinfo.asp?number=G21276) running in my garage for a while as a way to test my home automation setup. I replaced the LED on the kit with an optoisolator and connected it to an interrupt on an ESP32. I am counting events and reporting through MQTT to a Node Red server for display on a Grafana dashboard. I did a bit of searching and I think I found a Node Red flow to upload data to Radmon (https://gist.github.com/nathanchantrell/954ea54f25a43c20858a), so this weekend I'll try to get things connected and uploading. That is IF I don't get distracted trying to build the seismometer that's been bouncing around in my brain all week.

I also recently connected, I just connected the meter with a wireless audio transmitter.
and I have a seismograph too. I went from the pendulum to the seismograph with 3 geophones (4,5 Hz) connected to the small experimental dolfrang seismic network