Howdy

Hello folks, just recently realised i can upload data from the GC10 "Kinoko" geiger! So, for no particular reason, i will.
I don't imagine i'll detect anything interesting down here in Tasmania. I guess by the time i do, we will all have been doomed for some time.
So far i've got Radlog working, on windows, but i really need to be able to shut that computer down.
I've got a raspberry pi zero, so i installed pyradmon.py. So far it won't run, and i get this:

pi@raspberrypi:~ $ python PyRadmon.py
Reading configuration:

User name configured

Password configured

Serial port name configured

Serial port speed configured

Protocol configured

Device number configured

Protocol configured


Using myGeiger protocol for 1 => geiger 1

No samples in queue, waiting 5 seconds => geiger 1

Gathering data started => geiger 1

Initializing geiger communication => geiger 1


Problem in getData procedure (disconnected USB device?) => geiger 1:
invalid literal for int() with base 10: ''
Exiting

I guess, there is some kind of usb setup for linux, i'm missing. I'll probably work it out sometime, but a bit baffled at the moment.

lsusb tells me the device is recognised:
pi@raspberrypi:~ $ lsusb
Bus 001 Device 014: ID 0403:6001 Future Technology Devices International, Ltd FT232 USB-Serial (UART) IC
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub

ttyUSB0 also appears when i plug the device in.

Hi!
Should i post the problem in the PyRadmon section?
I just noticed a couple of people have had the same problem here: https://radmon.org/index.php/forum/pyradmon/369-disconnected-usb-device-problem
The post is 3 years old, and there does not seem to have been an answer.
Should i revive the old thread, or make a new one?