Connecting MightOhm Geiger Kit to radmon with ESP8266/ESP32 & OLED Display

Start
Prev
1
Next
End

whyza
Topic Author
Offline
New Member

2 years 3 months ago - 2 years 3 months ago #6187 by whyza

Connecting MightOhm Geiger Kit to radmon with ESP8266/ESP32 & OLED Display was created by whyza

I recently finished a Arduino sketch for connecting the MightyOhm Geiger Kit to the Adafruit Feather Huzzah ESP8266 & ESP32 v2 for upload to radmon.org and to output to a 128 x 64 OLED screen for data and graphical display.

The full details are available via

https://github.com/Whyzanet/WhyzaGC

Last edit: 2 years 3 months ago by whyza.

The following user(s) said Thank You: mw0uzo, yVega

Please Log in or Create an account to join the conversation.

yVega
Offline
New Member

2 years 3 months ago #6196 by yVega

Replied by yVega on topic Connecting MightOhm Geiger Kit to radmon with ESP8266/ESP32 & OLED Display

Very interesting..
a great job

Please Log in or Create an account to join the conversation.

rjelbert
Offline
New Member

2 years 2 months ago #6218 by rjelbert

Replied by rjelbert on topic Connecting MightOhm Geiger Kit to radmon with ESP8266/ESP32 & OLED Display

Hi. Great write up on github ( https://github.com/Whyzanet/WhyzaGC) and good use of the ESP32 + OLED. Thanks.
Regards
Richard

Please Log in or Create an account to join the conversation.

Start
Prev
1
Next
End

Moderators: Gamma-Man

Time to create page: 0.164 seconds

Solar powered Raspberry Pi 4 server stats: CPU 32% Memory 22% Swap 70% CPU temp=48.2'C Uptime 71 Days