request for assistance: CPM bounces from actual to 0.

More
5 years 5 months ago #2964 by ConiferCOUSA
Hiya. request for assistance. I think it is related to update frequency settings.
I have both set to 60 seconds. (capture and report I think.) My CPM on the live map bounces between what my 1 min average on my geiger counter shows, and 0. The online reporting tool shows the same. Lots of Zeros between my actual raw data. I don't see this behavior on other stations. I must have it misconfigured. Ideas?
Thank you,
Stephen

Make/Model: International Medcom RadAlert model 50
Tube: LND712

Please Log in or Create an account to join the conversation.

More
5 years 5 months ago #2975 by mw0uzo
Ok I've seen this before, I think last time it was because two RadLogs were running at the same time.
Close all RadLogs, check task manager for any hidden RadLogs, close/kill them.
Then start RadLog.

If only one is running, ensure you are using the stable version of RadLog.
The following user(s) said Thank You: nu3e

Please Log in or Create an account to join the conversation.

More
5 years 5 months ago #2983 by ConiferCOUSA
Wow. You nailed it. There was a second one running. Halted that instance and things look right now. Thank you.

Make/Model: International Medcom RadAlert model 50
Tube: LND712

Please Log in or Create an account to join the conversation.

More
5 years 3 months ago - 5 years 3 months ago #3197 by Timo70
Hi there.
I'v struggled with the same problem for a while.
As you can see in the picture, first i had meny zeros and average was quite low.
I have had changed values of "Serial-audio counting period" to 30s.
Changed it back to 60s, and it seems to be ok, and average peaks up.

What really are the right values, please advise?
Attachments:
Last edit: 5 years 3 months ago by Timo70.

Please Log in or Create an account to join the conversation.

Time to create page: 0.128 seconds
Powered by Kunena Forum
Solar powered Raspberry Pi 4 server stats: CPU 33% Memory 14% Swap 18% CPU temp=66.7'C Uptime 63 Days