SBM-20 and SBM-19 tube connector clips

Start
Prev
1
Next
End

oliverb
Topic Author
Offline
Junior Member

7 years 3 months ago - 7 years 3 months ago #2745 by oliverb

SBM-20 and SBM-19 tube connector clips was created by oliverb

I am trying to locate the electrical connectors for SBM-20 and SBM-19 tubes. At present I solder wires to the end of the tubes.

On some of the kits I have seen they seem to use cartridge fuse clips. I have searched ebay and can find 5mm clips but nothing bigger.

Anyone know the correct size clips and an Ebay or shop link where I can buy them?

Thanks.

Kenley Radiation Monitor http://www.brettoliver.org.uk/Geiger_Counter/Kenley_Radiation_Monitor.htm

Kenley Radiation Monitor Arduino Hardware http://www.brettoliver.org.uk/Geiger_Counter/Arduino_Geiger_Counter.htm

Last edit: 7 years 3 months ago by oliverb. Reason: Pic added

Please Log in or Create an account to join the conversation.

Bert490
Offline
Elite Member

7 years 3 months ago #2746 by Bert490

Replied by Bert490 on topic SBM-20 and SBM-19 tube connector clips

This one should work:
http://uk.rs-online.com/web/p/fuse-clips/7874249/
It's for a 6.3 mm diamater fuse, which matches the SBM-20 end tip of 6.5 mm. I used a 5 mm fuse clip, and it works but is not that secure.

The following user(s) said Thank You: Frank, oliverb

Please Log in or Create an account to join the conversation.

oliverb
Topic Author
Offline
Junior Member

7 years 3 months ago #2748 by oliverb

Replied by oliverb on topic SBM-20 and SBM-19 tube connector clips

Hi Bert490.
Thanks for the info will order some today.

Please Log in or Create an account to join the conversation.

Start
Prev
1
Next
End

Moderators: Gamma-Man

Time to create page: 0.127 seconds

Solar powered Raspberry Pi 4 server stats: CPU 37% Memory 14% Swap 17% CPU temp=55.0'C Uptime 41 Days