Welcome, Guest
Username: Password: Remember me

TOPIC: Help! Geiger counters yet to be tested with RadLog

Help! Geiger counters yet to be tested with RadLog 2 years 9 months ago #223

  • mw0uzo
  • mw0uzo's Avatar
  • OFFLINE
  • Moderator
  • Posts: 892
  • Thank you received: 182
  • Karma: 23
There are many of you with several Geiger counters out there. There are several commercial units that have not yet been tested with RadLog. The Inspector, Ecotest models etc.Can anyone help with getting these working?
The administrator has disabled public write access.

Help! Geiger counters yet to be tested with RadLog 2 years 9 months ago #224

  • AstroW
  • AstroW's Avatar
  • OFFLINE
  • Senior Member
  • Posts: 55
  • Thank you received: 6
  • Karma: 2
I'm planning to get a bGeigie nano from Safecast somewhere during spring, will try to get it to run with Radlog!
"Insane physicist student with a deep interest in watchmaking and quarks"
The administrator has disabled public write access.

International Medcom RadAlert 50 and 100. Tested OK with RADLOG V.41 7 months 3 weeks ago #2859

I am using an older, International Medcom Model RadAlert 50 in conjunction with a 1/8 stereo to USB data cable to connect to RadLog Version .41.
No special serial port drivers were required with this cable.
The operating system is Microsoft Windows 10.
Link to user manual


I am using a less old, International Medcom Model RadAlert 100 in conjunction with a 1/8 stereo to USB data cable to connect to RadLog Version .41.
The device is pretty much the same as the model 50 with a higher operating range.
No special serial port drivers were required with this cable.
The operating system is Microsoft Windows 10.
Link to user manual

I have RADLOG settings set to "Kit with USB serial-audio lead"




I have also tested this configuration successfully with PyRadMon.
Make/Model: International Medcom RadAlert model 50
Tube: LND712
Last Edit: 7 months 3 weeks ago by ConiferCOUSA.
The administrator has disabled public write access.

International Medcom RadAlert 50 and 100. Tested OK with RADLOG V.41 7 months 1 week ago #2879

  • mnrad
  • mnrad's Avatar
  • OFFLINE
  • Junior Member
  • Posts: 24
  • Thank you received: 3
  • Karma: 0
ConiferCOUSA,

Did you give up getting the Medcom Unit Running for your station? I see you have not submitted any data.
The administrator has disabled public write access.
Time to create page: 0.170 seconds
Powered by Kunena Forum